Lenovo IdeaPad 530S-14IKB Screen Assembly Replacement

crwdns2936071:01crwdne2936071:0 — Remove the bottom cover

Unscrew all 10 T5 screws. The screws are all the same length.

crwdns2936071:02crwdne2936071:0 — Disconnect the battery

Disconnect the battery off the main board.

crwdns2936071:03crwdne2936071:0 — Disconnect the antenna cables and mainboard

Disconnect antenna cable 1 and 2 und pull them out of their holding.

crwdns2936071:04crwdne2936071:0 — Disconnect the display and mainboard

Open the black lever on the display connection and carefully pull out the ribbon cable parallel to the mainboard. Do NOT pull upwards!

crwdns2936071:05crwdne2936071:0 — Separate the display assembly

Open the laptop in a 90 degree angle. Unscrew the 4 PH0 screws (all the same length).

crwdns2936071:06crwdne2936071:0 — Separate the covers on the display

Move the plastic cover from left to right. This might take a little bit of force.

crwdns2936071:07crwdne2936071:0 — Separate the display assembly of the enclosure

Unscrew the highlighted two PH000 screws (same length).

crwdns2936071:08crwdne2936071:0 — Lift the display assembly from the enclosure

Carfully push down on the display while pushing it in the direction of the arrows.

crwdns2936071:09crwdne2936071:0 — Disconnect the display assembly and enclosure

Disconnect the 30 pole ribbon cable of the display assembly. To do that you have to open the connection with the small metal lever. After opening it you can pull the ribbon cable straight down.

crwdns2936071:010crwdne2936071:0 — Put in the new display assembly

Apply the new pull tabs so that you can easily replace the screen again.