crwdns2936637:0crwdne2936637:0 crwdns2853008:0crwdne2853008:0 crwdns2918746:0crwdne2918746:0

华为 P40 Pro 屏幕更换

crwdns2935419:0crwdne2935419:0
crwdns2936315:0crwdne2936315:0
crwdns2936311:0crwdne2936311:0
crwdns2931653:02crwdne2931653:0
Huawei P40 Pro Screen Replacement, Loosen the display adhesive: crwdns2935265:00crwdnd2935265:01crwdnd2935265:02crwdne2935265:0 Huawei P40 Pro Screen Replacement, Loosen the display adhesive: crwdns2935265:00crwdnd2935265:02crwdnd2935265:02crwdne2935265:0
Loosen the display adhesive

  • Apply a heated iOpener or a heat gun to the screen to loosen the adhesive underneath. Apply the iOpener for at least two minutes.

  • The protective adhesive of the P40 Pro is very strong and hard to cut. It is likely that you have to reapply the iOpener after each of the following steps to soften the adhesive enough to cut it.

  • A hair dryer, heat gun, or hot plate may also be used, but be careful not to overheat the device.

  • Since the rear camera module sticks out of the midframe, we recommend placing a lint free cloth or similar underneath the camera module during the following steps in order to avoid damaging the lenses.

软化屏幕边胶

用加热的 iOpener 或热风枪对准屏幕，以软化边胶。使用 iOpener 时，需要至少加热两分钟。

P40 Pro 的边胶非常坚固，很难剪断。在完成以下每个步骤后，都可能需要继续用 iOpener 加热，才能使边胶软化到足以切割的程度。

也可以使用吹风机、热风枪或加热板，但要小心不要使设备过热。

由于后置摄像头模块伸出中框，我们建议在摄像头模块下方放置一块软布或其它柔软的物品，以避免损坏摄像头。

crwdns2944171:0crwdnd2944171:0crwdnd2944171:0crwdnd2944171:0crwdne2944171:0