crwdns2936637:0crwdne2936637:0 crwdns2853008:0crwdne2853008:0 crwdns2918746:0crwdne2918746:0

Reemplazo de batería Logitech G903

crwdns2935423:0crwdne2935423:0

crwdns2935425:01crwdne2935425:0

crwdns2935419:0crwdne2935419:0
crwdns2936315:0crwdne2936315:0
crwdns2936331:0crwdne2936331:0
crwdns2931653:01crwdne2931653:0
Logitech G903 Battery Replacement, Heat the battery adhesive: crwdns2935265:00crwdnd2935265:01crwdnd2935265:01crwdne2935265:0
Heat the battery adhesive

  • The battery housing is not directly touching the outer case, limiting heat transfer. You may need to repeat the heating process a couple of times to soften the adhesive enough to remove the battery.

  • Heat an iOpener and lay it on the top case for two minutes.

  • You can also use a hair dryer on the Low setting, but be careful as the plastic is susceptible to heat damage.

Calienta el adhesivo de la batería

La carcasa de la batería no está en contacto directo con la cubierta exterior del mouse. Debido a eso, es posible que debas repetir el procedimiento de calentamiento un par de veces para aflojar el adhesivo de la batería lo suficiente como para quitar la batería.

Calienta un iOpener y aplíquelo en la parte posterior del mouse.

También se puede utilizar un secador de pelo o una pistola de aire caliente, pero ten cuidado de no sobrecalentar la batería, ya que es susceptible de sufrir daños por calor.

A temperaturas más altas, la cubierta de plástico del ratón se vuelve sensible al calor. Evita sobrecalentarlo.

[title] Heat the battery adhesive
-[* icon_note] The battery housing is not in direct contact with the outer mouse cover. Because of that you might need to repeat the heating procedure a couple of times to loosen the battery adhesive enough in order to remove the battery.
-[* black] [guide|25705|Heat an iOpener|new_window=true] and apply it to the back of the mouse.
- [* icon_note] A hair dryer or heat gun may also be used, but be careful not to overheat the battery as it is susceptible to heat damage.
- [* icon_caution] At higher temperatures the plastic mouse cover becomes heat sensitive. Avoid overheating it.
+[* icon_note] The battery housing is not directly touching the outer case, limiting heat transfer. You may need to repeat the heating process a couple of times to soften the adhesive enough to remove the battery.
+[* black] [guide|25705|Heat an iOpener|new_window=true] and lay it on the top case for two minutes.
+ [* icon_note] You can also use a [guide|157348|hair dryer|new_window=true] on the ***Low*** setting, but be careful as the plastic is susceptible to heat damage.

crwdns2944171:0crwdnd2944171:0crwdnd2944171:0crwdnd2944171:0crwdne2944171:0