crwdns2936637:0crwdne2936637:0 crwdns2853008:0crwdne2853008:0 crwdns2918746:0crwdne2918746:0

2020 年初13寸MacBook Air 右扬声器更换

crwdns2931529:0crwdnd2931529:0crwdnd2931529:0crwdnd2931529:02crwdnd2931529:0crwdne2931529:0

crwdns2935419:0crwdne2935419:0
crwdns2936315:0crwdne2936315:0
crwdns2936311:0crwdne2936311:0
crwdns2931653:03crwdne2931653:0
MacBook Air 13" Early 2020 Right Speaker Replacement, Remove the right speaker adhesive: crwdns2935265:00crwdnd2935265:01crwdnd2935265:03crwdne2935265:0 MacBook Air 13" Early 2020 Right Speaker Replacement, Remove the right speaker adhesive: crwdns2935265:00crwdnd2935265:02crwdnd2935265:03crwdne2935265:0 MacBook Air 13" Early 2020 Right Speaker Replacement, Remove the right speaker adhesive: crwdns2935265:00crwdnd2935265:03crwdnd2935265:03crwdne2935265:0
Remove the right speaker adhesive

  • Use a pair of tweezers to lift up the black adhesive pull tab at the bottom of the right speaker, enough so you can grab it with your fingers.

  • Grab the adhesive strip's pull tab and slowly pull the adhesive strip out from underneath the speaker.

  • Keep the angle of the adhesive strip as parallel to the laptop as you can. Try to avoid dragging it across the inside of the case.

  • Pull the adhesive strip until it's freed from under the speaker.

  • If the adhesive strip breaks, use a heated iOpener, a heat gun, or a hair dryer to help remove the adhesive:

  • Apply heat to the speaker to soften the adhesive underneath.

  • Carefully slide a spudger or opening pick underneath the speaker to separate the adhesive.

去除右扬声器粘合剂

用镊子提起右侧扬声器底部的黑色粘性拉片，足以让你用手指抓住它。

抓住胶带的拉条，然后将胶带从扬声器下方慢慢拉出。

尽可能保持胶带的角度与笔记本电脑平行。尽量避免将其拖过外壳内部。

拉动胶带，直到它从扬声器下方脱离。

如果胶带断裂，请使用加热的 iOpener、热风枪或吹风机来帮助去除粘合剂：

对扬声器加热以软化下面的粘合剂。

小心地在扬声器下方滑动撬棒或撬片以分离粘合剂。

[title] Remove the right speaker adhesive
-[* black] Use a pair of tweezers to lift up the black adhesive pull tab at the bottom of the right speaker, enough so you can grab it with your fingers.
+[* black] Use a pair of [product|IF145-020|tweezers] to lift up the black adhesive pull tab at the bottom of the right speaker, enough so you can grab it with your fingers.
[* black] Grab the adhesive strip's pull tab and slowly pull the adhesive strip out from underneath the speaker.
[* icon_note] Keep the angle of the adhesive strip as parallel to the laptop as you can. Try to avoid dragging it across the inside of the case.
[* black] Pull the adhesive strip until it's freed from under the speaker.
[* icon_note] If the adhesive strip breaks, use a [guide|25705|heated iOpener|new_window=true], a heat gun, or a hair dryer to help remove the adhesive:
[* black] Apply heat to the speaker to soften the adhesive underneath.
[* black] Carefully slide a spudger or opening pick underneath the speaker to separate the adhesive.

crwdns2944171:0crwdnd2944171:0crwdnd2944171:0crwdnd2944171:0crwdne2944171:0