crwdns2936637:0crwdne2936637:0 crwdns2853008:0crwdne2853008:0 crwdns2918746:0crwdne2918746:0

Google Pixel 5 主板更换

crwdns2933809:0crwdne2933809:0

crwdns2935433:0crwdne2935433:0

Google Pixel 5 SIM卡卡托更换

Google Pixel 5 屏幕更换

Google Pixel 5 电池断连

Google Pixel 5 后置摄像头更换

Google Pixel 5 电池更换

crwdns2935443:0crwdne2935443:0

= crwdns2915112:0crwdne2915112:0 = crwdns2861241:0crwdne2861241:0
crwdns2936315:0crwdne2936315:0
crwdns2936311:0crwdne2936311:0
    ***This repair guide was authored by the iFixit staff and hasn’t been endorsed by Google. Learn more about our repair guides [[Info:content-quality|here|new_window=true]].***
    Follow this guide to remove and replace the motherboard on the Google Pixel 5.
    You will need a replacement battery before attempting this procedure as you cannot remove the motherboard without first removing the battery.
    ***For your safety, discharge your battery below 25% before disassembling your phone.*** This reduces the risk of a dangerous thermal event if the battery is accidentally damaged during the repair.
    '''For your safety, discharge your battery below 25% before disassembling your phone.''' This reduces the risk of a dangerous thermal event if the battery is accidentally damaged during the repair.
    ***Warning:*** Do not reuse the battery if it has been deformed or damaged, as doing so is a potential safety hazard. Replace it with a new battery.
      Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing.
      '''***To reassemble your device, follow the above steps in reverse order.'''***
      Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler]].
      Repair didn’t go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting]], or ask our [link|https://www.ifixit.com/Answers/Device/Google%20Pixel%205|Answers community] for help.

      crwdns2931349:0crwdne2931349:0

      crwdns2936071:01crwdne2936071:0 — 断开按压式接口的连接

      用塑料撬棒的尖端竖直撬起这2个按压式接口，将它们与主板断开连接。

      crwdns2936071:02crwdne2936071:0 — 移除主板螺丝

      使用 T3 六角螺丝刀，卸下把主板固定到后壳的2颗2.9毫米长的螺丝。

      crwdns2936071:03crwdne2936071:0 — 移开排线，让出空间

      用塑料撬棒轻轻地将盖在后壳按压接口上的排线抬起。

      crwdns2936071:04crwdne2936071:0 — 断开按压式接口的连接

      用塑料撬棒撬起并断开后壳按压式接口的连接。

      crwdns2936071:05crwdne2936071:0 — 移除主板

      将撬棒的尖头插入前置摄像头附近的螺丝孔。

      crwdns2936071:06crwdne2936071:0

      用您的手指将主板朝上向后壳顶部拉起，将充电接口从后壳下方拉出。

      crwdns2936071:07crwdne2936071:0

      移除主板后，顶部的垫片可能会掉落移位。记得在重新密封手机之前重新安装这个垫片。

      crwdns2944171:0crwdnd2944171:0crwdnd2944171:0crwdnd2944171:0crwdne2944171:0