SHIFT6mq Main Camera Replacement

crwdns2936071:01crwdne2936071:0 — Remove adhesive strips

Here you can see the main board. In the middle you can see the dual camera of the SHIFT6mq.

crwdns2936071:02crwdne2936071:0 — Detach connector

Detach the lower camera connector. To do so, insert a spudger or a fingernail on the upper, shorter side of the connector and lift it off.

crwdns2936071:03crwdne2936071:0 — Insert new camera

Carefully place the camera in the mainboard's recess.

crwdns2936071:04crwdne2936071:0 — Glue on the ground connector

Take the supplied small adhesive tape and stick it over the mainboard shielding and both cameras, as seen at the beginning.

crwdns2936071:05crwdne2936071:0 — Attach display

Place the display on the phone with the screen facing outwards.

crwdns2936071:06crwdne2936071:0 — Insert screws

If everything works properly, turn your SHIFT6mq over and screw all 14 screws back into the holes provided.

crwdns2936071:07crwdne2936071:0 — Final step

Once all the screws have been reinserted, insert the battery, attach the back cover and pull the bumper over the phone.