SHIFT6mq Display replacement

crwdns2936071:01crwdne2936071:0 — Display Connector

Disconnect the display connector Detach the display connector from the short side with a lever movement in the direction of the adjacent connector.

crwdns2936071:02crwdne2936071:0 — Speaker Transfer

The speaker is still in the dismantled display. Carefully pry it out of its housing with sturdy tweezers or a thin spatula. There is a slot for it on the right.

crwdns2936071:03crwdne2936071:0 — Check Thermal Pad

There is a heat pipe under the display that conducts the waste heat from the CPU to the outside. When installed, the visible copper area sits above the CPU. In order to ensure the ideal heat transport, a heat-conducting pad should sit between the shielding on the motherboard and the heat pipe.

crwdns2936071:04crwdne2936071:0 — Connect Display Connector

Place the display on the phone with the back facing up.

crwdns2936071:05crwdne2936071:0 — Display install

After the display connector is connected, place the display on the phone with the screen facing out.

crwdns2936071:06crwdne2936071:0 — Replace Screws

If everything works properly, turn your SHIFT6mq over and screw all 14 screws back into the screw bosses provided.

crwdns2936071:07crwdne2936071:0 — Last Steps

Once all the screws have been reinserted, insert the battery, attach the back cover and pull the bumper over the phone.