crwdns2933423:0crwdne2933423:0

Google Pixel 4 linken Gripsensor tauschen

crwdns2935443:0crwdne2935443:0

= crwdns2915112:0crwdne2915112:0 = crwdns2861241:0crwdne2861241:0
crwdns2936315:0crwdne2936315:0
crwdns2936319:0crwdne2936319:0
    ***This repair guide was authored by the iFixit staff and hasn’t been endorsed by Google.*** Learn more about our repair guides [link|https[Info://www.ifixit.com/Info/content-quality|here|new_window=true]].
    Use this guide to replace the left grip sensor and flex cable in your Google Pixel 4.
    This procedure requires the removal of the battery and motherboard.
    ***For your safety, discharge your battery below 25% before disassembling your phone.*** This reduces the risk of a dangerous thermal event if the battery is accidentally damaged during the repair.
    ***This procedure will almost always destructively remove the Pixel 4’s grip sensors.*** The sensors are strongly adhered to the phone’s midframe and will usually come out in pieces. Before you begin this procedure, be sure to have replacement parts.
    ***Caution:*** Google warns that disassembly of the front laser assembly could result in hazardous exposure to invisible infrared laser emissions. Read their safety warnings [link|https://support.google.com/pixelphone/answer/9369238?hl=en|here].
    ***Warning:*** Do not reuse the battery if it has been deformed or damaged, as doing so is a potential safety hazard. Replace it with a new battery.
      Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing.
      '''***To reassemble your device, follow the above steps in reverse order.'''***
      Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
      Repair didn’t go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting]], or ask our [link|https://www.ifixit.com/Answers/Device/Google%20Pixel%204|Answers community] for help.

      crwdns2931349:0crwdne2931349:0

      crwdns2936071:01crwdne2936071:0 — Linken Gripsensor entfernen

      Kippe den grauen Kunststoffschutz über dem Gripsensor mit einer Pinzette vom Rand des Rahmens weg.

      crwdns2936071:02crwdne2936071:0

      Ziehe das Flachbandkabel zum Gripsensors mit einer Pinzette vom Rahmen des Smartphones ab. Es ist leicht verklebt.

      crwdns2936071:03crwdne2936071:0

      Ziehe das Flachbandkabel weiter ab, bis es nicht mehr an der Rückseite des Smartphones festklebt.

      crwdns2936071:04crwdne2936071:0

      Löse den Gripsensor mit einer Pinzette von der inneren Seitenkante des Rahmens ab.

      crwdns2936071:05crwdne2936071:0

      Wenn der Gripsensor ganz abgelöst ist, hole ihn hinter der Seitentasteneinheit heraus.

      crwdns2944171:0crwdnd2944171:0crwdnd2944171:0crwdnd2944171:0crwdne2944171:0