crwdns2936637:0crwdne2936637:0 crwdns2853008:0crwdne2853008:0 crwdns2918746:0crwdne2918746:0

Sostituzione schermo Google Pixel 4 XL

crwdns2933809:0crwdne2933809:0

crwdns2935433:0crwdne2935433:0

Sostituzione vassoio scheda SIM Google Pixel 4 XL

Sostituzione pannello posteriore Google Pixel 4 XL

Sostituzione gruppo fotocamera e sensori anteriori Google Pixel 4 XL

crwdns2935443:0crwdne2935443:0

= crwdns2915112:0crwdne2915112:0 = crwdns2861241:0crwdne2861241:0
crwdns2936315:0crwdne2936315:0
crwdns2936321:0crwdne2936321:0
Screen
Display Assembly
Google Pixel 4 XL ScreenDisplay Assembly Replacement
    Use this guide to remove or replace the screen assembly on your Google Pixel 4 XL.
    ***This repair guide was authored by the iFixit staff and hasn’t been endorsed by Google.*** Learn more about our repair guides [[Info:content-quality|here|new_window=true]].
    Due to the Pixel’s design, you will have to remove the back panel in order to disconnect the screen connector.
    Use this guide to remove or replace the display assembly on your Google Pixel 4 XL.
    Before you begin this procedure, be sure to have a set of replacement adhesives for both the back panel and the screen.
    ***Note:*** Follow this guide to replace the display assembly by itself. Some replacement assemblies for this phone come pre-installed in a new frame (a.k.a. chassis), which requires you to transplant all of your phone's internals and install a new battery. If you're replacing the display assembly attached to a frame, [guide|151100|follow this guide instead|new_window=true].
    '''This procedure will almost always destructively remove the Pixel 4 XL’s screen.''' OLEDs cease to work when exposed to oxygen or moisture, and are thus sealed in an airtight encapsulation (this is also why OLED panels turn black underneath a screen crack). It is very difficult to replace the front glass alone— the Pixel’s OLED layers are laminated to the glass, and the screen will come out as one unit.
    Due to the Pixel’s design, you will have to remove the back panel in order to disconnect the display connector.
    '''Before you begin this procedure, be sure to have a set of replacement adhesives for both the back panel and the display panel.

    ***This procedure will almost always destructively remove the Pixel 4 XL’s display assembly.*** OLEDs cease to work when exposed to oxygen or moisture, and are thus sealed in an airtight encapsulation (this is also why OLED panels turn black underneath a display assembly crack). It is very difficult to replace the front glass alone— the Pixel’s OLED layers are laminated to the glass, and the display assembly will come out as one unit.

    ***    Caution:'''*** Google warns that disassembly of the front laser assembly could result in hazardous exposure to invisible infrared laser emissions. Read their safety warnings [link|https://support.google.com/pixelphone/answer/9369238?hl=en|here].
      Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing.
      '''***To reassemble your device, follow the above steps in reverse order.'''***
      Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
      Repair didn’t go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting]], or ask our [link|https://www.ifixit.com/Answers/Device/Google%20Pixel%204%20XL|Answers community] for help.

      crwdns2931349:0crwdne2931349:0

      crwdns2936071:01crwdne2936071:0 — Scollega lo schermo

      Usa un cacciavite Torx T3 per svitare le quattro viti da 3,5 mm che tengono ferma la copertura del connettore dello schermo.

      crwdns2936071:02crwdne2936071:0

      Usa un paio di pinzette per rimuovere la copertura del connettore dello schermo.

      crwdns2936071:03crwdne2936071:0

      Usa la parte piatta di uno spudger per scollegare il connettore dello schermo dalla scheda madre.

      crwdns2936071:04crwdne2936071:0 — Taglia l'adesivo dello schermo

      Prepara un iOpener e appoggialo al bordo destro dello schermo, vicino al tasto di accensione, per un minuto.

      crwdns2936071:05crwdne2936071:0

      Questa procedura distruggerà quasi sempre il pannello OLED dello schermo. Procedi solo se stai sostituendo uno schermo già rotto.

      crwdns2936071:06crwdne2936071:0

      Fai scorrere il plettro tra lo schermo e la cornice verso l'angolo in basso del bordo destro per tagliare l'adesivo.

      crwdns2936071:07crwdne2936071:0

      Infila un secondo plettro sotto l'angolo in alto a sinistra del telefono, vicino al foro della fotocamera anteriore.

      crwdns2936071:08crwdne2936071:0

      Infila un terzo plettro sotto lo schermo al centro del bordo destro del telefono e ruotalo per separare lo schermo.

      crwdns2936071:09crwdne2936071:0 — Inclina lo schermo

      Inclina lo schermo sollevandone il bordo sinistro.

      crwdns2936071:010crwdne2936071:0 — Fai passare il connettore dello schermo attraverso la cornice

      Fai passare il connettore dello schermo attraverso il foro vicino alla scheda madre per separare lo schermo dal telefono.

      crwdns2936071:011crwdne2936071:0 — Rimuovi lo schermo

      Rimuovi lo schermo.

      crwdns2944171:0crwdnd2944171:0crwdnd2944171:0crwdnd2944171:0crwdne2944171:0