crwdns2933423:0crwdne2933423:0

Samsung LED TV LE37A659 T-Con Board Austausch

crwdns2936315:0crwdne2936315:0
crwdns2936319:0crwdne2936319:0
crwdns2931653:03crwdne2931653:0
Samsung LED TV LE37A659 (and similar models) T-Con Board Replacement, Removing the T-Con Board: crwdns2935265:00crwdnd2935265:01crwdnd2935265:03crwdne2935265:0 Samsung LED TV LE37A659 (and similar models) T-Con Board Replacement, Removing the T-Con Board: crwdns2935265:00crwdnd2935265:02crwdnd2935265:03crwdne2935265:0 Samsung LED TV LE37A659 (and similar models) T-Con Board Replacement, Removing the T-Con Board: crwdns2935265:00crwdnd2935265:03crwdnd2935265:03crwdne2935265:0
Removing the T-Con Board
  • This is the interior of the TV, with the top facing you (bottom side of the picture). You see the power supply board in the center, and the main board. The T-Con board is hidden by a metal cover.

  • To get to it, we will have to remove all screws on the parts that cover it. Luckily, the screws are marked with an arrow symbol.

  • Remove the wall mount bar by loosening the two screws.

  • Remove the metal part on the top which also is blocking access to the T-Con board.

  • Remove the T-Con board connectors.

  • Remove the 5 screws holding the T-Con boards and it's metal cover.

  • Now you can carefully shift away the metal cover of the T-Con board below the other metal bar.

  • Two flat ribbon cables are connected from the display to the T-Con board. They can be removed by carefully unlocking the socket (take some plastic lever or your fingernail and turn up the black hinge).

Hier siehst Du das innere des TV, die Oberkante des Bildschirms zeigt zu Dir (ist unten). Das T-Con Board befindet sich unter einer Metallabdeckung.

Um an das T-Con Board ranzukommen, müssen wir die Teile, die es verdecken, soweit lösen, dass wir die Metallabdeckung und das Board darunter hervorziehen können. Alle zu lösenden Schrauben sind auf dem Fernseher mit einem Pfeil markiert.

Entferne das Metallteil der Wandhalterung (2 Schrauben).

Entferne das Metallteil am oberen Displayrand, es blockiert das T-Con Board Cover (5 Schrauben).

Entferne die 2 Stecker die zum T-Con Board führen (oranger Pfeil im Bild!)

Entferne die 5 Schrauben die das T-Con Board fixieren und schiebe das Metallcover seitlich weg.

s.o.

Die zwei Flachbandkabel, die vom T-Con Board zum Display gehen, vorsichtig vom Sockel lösen, indem Du mit dem Fingernagel oder einem Plastikhebel den schwarzen Hebel am Sockel umklappst.

crwdns2944171:0crwdnd2944171:0crwdnd2944171:0crwdnd2944171:0crwdne2944171:0