Open Saeco Odea

crwdns2936071:01crwdne2936071:0

Warning: Unplug the device from power before you start!

crwdns2936071:02crwdne2936071:0

Pull the steam valve button up.

crwdns2936071:03crwdne2936071:0

Remove the cover from the coffee spout. Lift them from bottom to top, using only plastic tools to pry.

crwdns2936071:04crwdne2936071:0

Unscrew the two Torx T10 screws on the coffee spout.

crwdns2936071:05crwdne2936071:0

Using a Torx T10 screwdriver remove the single screw from the bean container.

crwdns2936071:06crwdne2936071:0

The large silver-colored molded part above the top and front is now only fastened with catches, which can, however, be quite stuck. Only use plastic tools to pry loose.

crwdns2936071:07crwdne2936071:0

Now only the two side parts are left. The left side part contains the steam pipe. Most of the time you can leave the pressure hose of the steam pipe connected, then the side part cannot be completely removed, but that doesn't bother you very much.

crwdns2936071:08crwdne2936071:0

Remove two screws on the side with the water tank.