Samsung Galaxy S9 Plus Display Replacement

crwdns2933809:0crwdne2933809:0

crwdns2935433:0crwdne2935433:0

Samsung Galaxy S9 Plus Rear Glass Removal

Samsung Galaxy S9 Plus NFC Antenna and Charging Coil Replacement

Samsung Galaxy S9 Plus Battery Disconnect

Samsung Galaxy S9 Plus Motherboard Mid Cover Replacement

crwdns2935443:0crwdne2935443:0

= crwdns2915112:0crwdne2915112:0 = crwdns2861241:0crwdne2861241:0

crwdns2936315:0crwdne2936315:0

crwdns2936325:0crwdne2936325:0

crwdns2936129:0crwdne2936129:0

crwdns2947189:0crwdne2947189:0

crwdns2915892:0crwdne2915892:0

Use this guide to replace a cracked or broken display on your Samsung Galaxy S9 Plus.

'''Before disassembling your phone, discharge the battery below 25%. The battery can catch fire and/or explode if accidentally punctured, but the chances of that happening are much lower if discharged.'''

'''Note''': This guide instructs you to replace only the display while leaving the original frame, motherboard, and battery in place. However, some replacement screens for this phone come pre-installed in a new frame (a.k.a. chassis), which requires a very different procedure—transplanting your phone's internals and installing a new battery. Make sure you have the correct part before starting this guide.

This guide involves removing the rear glass cover; you will need replacement adhesive to reattach the back cover to the phone. If your replacement display does not come with adhesive, use a strong double-sided tape such as [product|IF317-072|Tesa 61395|new_window=true] to secure it.

Opening the Samsung Galaxy S9 Plus will '''damage the waterproof seals''' on the device. If you do not replace the adhesive seals, your phone will '''function normally''', but will '''lose its water protection'''.

'''If the frame is damaged or bent''', it's important to replace it, or else the new screen may not mount correctly and can suffer damage from uneven pressure.

The process of separating the display from the frame usually destroys the display, so don't follow this guide unless you intend to replace the display.

crwdns2915888:0crwdne2915888:0

Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing.

The best way to secure the new screen is with a sheet of custom-cut double-sided tape. Apply the tape to the back of the screen, then carefully feed the display cable through the frame. Align the screen and press it into place.

***To reassemble your device, follow the above steps in reverse order.***

After you've completed the repair, ++[link|https://www.ifixit.com/Guide/How+to+Test+Your+Samsung+Device+After+a+Repair/152254|follow this guide|new_window=true]++ to test your repair.

If possible, turn on your phone and test your repair before installing new adhesive and resealing the phone.

Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].

Repair didn’t go as planned? Check out our [link|https://www.ifixit.com/Answers/Device/Samsung%20Galaxy%20S9%20Plus|Answers community] for troubleshooting help.