crwdns2933423:0crwdne2933423:0

Nintendo Switch 방열판 교체

crwdns2935443:0crwdne2935443:0

= crwdns2915112:0crwdne2915112:0 = crwdns2861241:0crwdne2861241:0
crwdns2936315:0crwdne2936315:0
crwdns2936325:0crwdne2936325:0
    Follow this guide to remove and replace the heat sink on the Nintendo Switch game console.
    ***The Switch uses JIS screws. A JIS 00 driver works best, but you can also use a JIS 000 driver. If you use a Phillips screwdriver in a pinch. Be very careful not to stripdriver, you'll risk stripping the screws. iFixit's Phillips bits are designed to be cross-compatible with JIS-style screws.***
    ***Note:*** When you remove the shield plate, you’ll need to replace the thermal compound between the plate and the heatsink. Since normal thermal paste isn’t designed to bridge large gaps, the closest replacement is K5 Pro viscous thermal paste. You will, however need normal replacement thermal paste for the CPU.
    ***Note:*** This guide, and the part we sell, are compatible with the original Nintendo Switch model released in 2017, as well as the newer refreshed model released in 2019 (model numbers HAC-001 and HAC-001(-01), respectively).

      crwdns2931349:0crwdne2931349:0

      crwdns2936071:01crwdne2936071:0 — 방열판 분리하기

      JIS 000 드라이버 또는 공식 iFixit PH 000 드라이버를 사용하여 방열판을 마더보드에 고정하는 3mm 나사 세 개를 풀어주세요.

      crwdns2936071:02crwdne2936071:0

      방열판과 팬 위에 붙어 있는 폼 조각 두 개를 팬에서 조심히 떼어내세요.

      crwdns2936071:03crwdne2936071:0

      Spudger/스퍼저 또는 손가락을 사용하여 방열판을 들어 올려 마더보드에서 분리하세요.

      crwdns2944171:0crwdnd2944171:0crwdnd2944171:0crwdnd2944171:0crwdne2944171:0