crwdns2933423:0crwdne2933423:0
crwdns2918538:0crwdne2918538:0

Samsung NX 50-150 f/2.8 S Lens - Focus Cable Repair

crwdns2935359:0crwdne2935359:0

  • 1 × Phillips #0 Screwdriver
  • 1 × Phillips #00 Screwdriver
  • 1 × Phillips #000 Screwdriver
  • 1 × 2.0x0.4mm Flat-head Screwdriver
  • 1 × 1.5x0.23mm Flat-head Screwdriver
  • 1 × 1.2x0.2mm Flat-head Screwdriver
  • 1 × Tweezers, Fine tipNarrow for reaching into small deep spaces
  • 1 × Lint-free wipes, Lens cleaningYou will need many of these
  • 1 × Container, Sealable and 3-5L sizeTo keep disassembled parts dust free
  • 20 × Ziplock Bags, Approx 150x100mmTo keep each stages parts separate and clean
  • 1 × Grounding Mat or ESD-Safe Work SurfaceClean and oil free.
  • 1 × ESD Wrist Band
  • 1 × Permanent MakerThat will write on your ziplock bags
  • 1 × ESD Bag, Approx 100x100mm
  • 1 × Pencil
  • 1 × Disposable Latex Gloves, powder free
  • 1 × Masking Tapedon't want it to leave residue, so a 'gentle' tape would be best.
  • 1 × Double-Sided Tape, 3M 468MPdigikey: 1067-468MP-1-5-ND
  • 1 × Scalpel, for scraping
  • 1 × Soldering Iron, extra fine tip
  • 1 × Solder Wick Braid
  • 1 × flux remover
  • 1 × Cotton Swabs
  • 1 × Isopropyl Alcohol (90% or Greater)
  • 1 × helimax-xp
  • 1 × Custom Flex PCB XL1406_AF_FPC_SPLICE, Flex PCBhttps://github.com/mostlyhorses/XL1406_AF_FPC_SPLICE
crwdns2915442:0crwdne2915442:0

crwdns2944171:0crwdnd2944171:0crwdnd2944171:0crwdnd2944171:0crwdne2944171:0