Using a PH0 Screwdriver remove the 3 silver screws holding the iFn sleeve onto the body. Do not separate yet.

Do NOT separate the two parts yet

Note the plastic shims that will come apart with this. The black one is inner (towards the front of the lens), and the clear one outer (towards camera).

Lie the lens on its side, and gently and gradually pull the front of the lens away from the body exposing a FPC Ribbon cable. Disconnect the cable from the connector and then finish separating the parts.

Screws: 3@ M1.4 x 4mm Wafer head (thread lock)

FPC Ribbon: XL1406_MF_PI_FPC_Rev04