crwdns2915892:0crwdne2915892:0
Follow this guide to replace the loudspeaker aka bottom speaker in your iPhone 16 Pro.
You may need to replace your loudspeaker if the sound coming through your iPhone's bottom speaker is faint or crackling.
You'll need replacement back glass adhesive to complete this repair.
crwdns2942213:0crwdne2942213:0
-
-
Unplug any cables from your phone.
-
Hold the power and either volume buttons and slide to power off your phone.
-
-
-
If your screen or back glass is badly cracked, lay overlapping strips of packing tape over the glass to protect yourself and make disassembly easier.
-
-
-
-
Measure 3 mm from the tip and mark the opening pick with a permanent marker.
-
-
-
Use a P2 pentalobe screwdriver to remove the two 7.4 mm‑long screws on either side of the USB-C port.
-
-
-
Remove the four screws securing the loudspeaker:
-
Two 1.6 mm‑long Phillips screws
-
One 2.0 mm‑long Phillips screw
-
One 1.3 mm‑long tri-point Y000 screw
-
-
-
Insert the point of a spudger underneath the loudspeaker's bottom-right screw hole.
-
Pry up and remove the loudspeaker.
-
To reassemble your iPhone, follow this guide to reapply adhesive and install your back glass.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting, or ask our iPhone 16 Pro Answers community for help.
To reassemble your iPhone, follow this guide to reapply adhesive and install your back glass.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting, or ask our iPhone 16 Pro Answers community for help.
