Pull the two bundled cables away from the connector in the same direction as the individual wires are running.

Potential for device damage: Pull evenly on the full width of the cable so that no individual wires are overly strained.

Pull the no-fuss ribbon cable straight out of the connector.

Potential for device damage: These kinds of connectors are fairly rare, so check carefully for a way to release the connector before you resort to pulling on the ribbon cable.

Pull the single bundled cable away from the connector in the same direction as the individual wires are running.

Potential for device damage: Pull evenly on the full width of the cable so that no individual wires are overly strained.