Now we will pry the back housing from the phone.

I started at the top left corner and worked my way around to the right top corner.

Don't worry about prying at the very top.

You can use a pry tool like the one in the photo or a guitar pick works great as well.

Don't pry to hard or to deep or you may damage the frame or possibly tear a ribbon cable (which is never a good thing).

Now that there is some seperation start at the bottom and lift with your fingers to pop the back housing off the phone.

It should pop off easily, but if not, don't force it and try running your pry tool along the edges again.