Be very careful during this step! Once the adhesive sticks to the frame, it can't be repositioned—you'll need to start over with a new strip.

Remove the larger, clear liner from one of the adhesive strips.

Line up the strip and use your finger to secure one end to the frame.

With one end secured, gently lay the strip onto the frame using your finger to lightly press down on the strip as you go.

Use the flat end of a spudger to firmly push down on the strip, securing it to the frame.

Do not remove the remaining colored liner yet—it'll be removed in a later step.

Repeat the process to apply the remaining adhesive strips.