Be very careful not to strain the screen cable during this step. You may need to hold the screen up at an angle to help position the cable.

Align the screen press connector over its socket and gently press down on one side until it clicks into place, then press down on the other side.

Don't press down in the middle. If the connector is misaligned, the pins can bend and cause permanent damage.

Now is a good time to test your phone before sealing it up. Power it on and check that it works. Power it back down before you continue reassembly.

Hook the bottom edge of the screen cable bracket into its cutout and firmly press down on the top edge until the bracket clicks into place.