There is a base under the electric machine to connect the electric machine to the top housing of the blender.

First use a Phillips screwdriver to disassemble the three Phillips screws to separate the electric machine and base from the top housing of the blender.

Then disassemble the Phillips screws on the back of the base to separate the base from the electric machine.

These two Phillips screws are the same as the yellow ones, but after many attempts, they were still very difficult to disassemble, so I destroyed them with a power drill.

By disassembling these two Philips screws, the electric machine can be separated into an outer electric machine and an inner electric machine. When the electric machine is powered on, it rotates through the interaction of these two groups.