Remove the two (2) highlighted connectors first. You can use the tabs connected to the ribbon cables, but do NOT pull on the cables themselves. Each cable has a hard plastic stiffener attached that can be used to lever the cables out if the tabs are damaged or missing.

Remove the second set of cables AND the single (1) M2.5x5mm Philips screw that connects one of the cables to the shield.

Using a pair of tweezers or plastic spudger, release the clip on the back to remove the hinge covers on both sides.

Remove the two (2) M2.5x4mm screws connecting the display to the case on both sides.

The display assembly should now be able to be removed and set aside.

If you're ONLY working on the display, you can skip to step 14 of the guide.