EET owners: Your bit does not have this kit. Step 1 covers the current recommendation (Pro Tech Go or HF toolkit). If you want a cheap way to augment an existing EET, the Hart 61 bit screwdriver kit (Standalone) (or the 31 bit version) is a well made low-cost driver kit that includes the required 5mm bit that I have personally tested). The Mako driver kit (Refurbished) or Moray driver kit (Refurbished) also has the 5mm bit.

Needlenose plyers can be used in place of the nut driver. However, it will be hard to properly re-tighten the screws.

Remove the 4 screw pins for the video cables from the monitor. Use a 5mm Nut bit/driver to remove the screw pins from the power supply shield.