Inserting an opening pick is very difficult. Be patient and reheat the screen at any point if it feels stuck.

Apply a suction handle to the center of the top edge of the screen.

If you can't apply a suction handle to a broken or uneven screen, try folding a strong piece of tape into a handle.

Don't insert your pick deeper than 2 mm, as you risk damaging the front-facing camera.

Pull up on the suction handle with a strong, steady force.

Insert the tip of an opening pick into the left side of the earpiece speaker cutout.

Firmly press the pick into the cutout and lower it flat to the screen until it slides under the glass.

If your pick is too thick to slide under the glass, try a thinner object like the flat edge of a Jimmy.