Open the latch and disconnect the display cable from the system board.

Disconnect the Alienhead LED cable from the system board.

Peel the display cable from the system board and remove the display cable from the slot on the system board.

Lift the system board Mylar next to the left fan to access the power-adapter port.

Remove the two screws (M2x4) on the power-adapter port-bracket that secures the power-adapter port bracket to the systemboard.

Lift the power-adapter port-bracket off the system board.

Disconnect the power-adapter port-cable from the system board.

Peel and lift the power-adapter port, along with its cable, off the system board.