Insert an opening pick under the top edge of the front camera.

Slide the opening pick under the front camera toward its connector to cut through the adhesive.

If the adhesive is too difficult to cut through, follow these steps:

Apply a few drops of high-concentration (90% or higher) isopropyl alcohol to the left edge of the front camera.

Wait thirty seconds for the isopropyl alcohol to weaken the adhesive.

Use an opening pick to cut through the adhesive under the front camera.

Only apply as much isopropyl alcohol as needed while removing the front camera. Isopropyl alcohol may permanently obscure the front and rear camera lenses, causing blurry photos.