Hook the switch puller onto the top and bottom tabs of the switch.

Hold the board down with one hand.

Use your other hand to squeeze the tabs firmly with the switch puller and pull straight upwards until the switch pops off.

If the switch does not pop off, check to make sure the switch tabs are not broken before trying again.

Alternatively, you can wedge a spudger underneath the bottom tab of the switch.

Use the spudger to squeeze the bottom tab before levering the bottom of the switch upwards.

After it partially dislodges, position the spudger under the top tab of the switch.

Squeeze and pop the top of the switch off the keyboard.