After removing the screen remove the remnants of the tape from the bezel in preparation for reassembly.

Take great care to not touch the clear digitizer glass with hands or tape adhesive.

Using nitrile, latex, or vinyl gloves will keep fingerprints from the display.

Apply hot air to loosen the bond. Too much heat will allow spots of adhesive to stick to the bezel.

Use a spudge to start lifting the tape, then grip with your fingers to pull the tape up.

Use a tacky portion of the old tape to lift off adhesive remaining in the tape channel.

Use a cotton swab moistened with isopropyl alcohol to thoroughly clean any remaining tape from the tape channel.