Use your fingers to grip the battery cables and pull the connector straight up and out of its socket.

Remove the battery.

During reassembly:

Never install a deformed or damaged battery, as doing so is a potential safety hazard. Replace it with a new battery.

If the battery adhesive is still sticky, you can reuse it. Otherwise, remove all the old battery adhesive.

If your new battery has adhesive pre-installed, remove the plastic liner to expose the adhesive. Otherwise, apply strips of thin, double-sided tape to the battery well (not directly to the battery) where the old adhesive was.

Firmly press the battery into place, making sure the cables are on the side closest to their socket.