The wires attached to the gearbox are fragile and can be broken off easily. Take care when handling the gearbox.

Place the gearbox back in its holster and secure the wiring with the wire lock.

Route the wiring through the hole in the rear casing, and reattach all screws.

Reattach the wheel to the leg and secure it with the screw.

Reconnect the wheel covers and attach the screws.

Route the wires through the opening in the body, and reattach it to the connector.

Reattach the screws securing the motherboard and power board.

Slide the LED Mood Indicator cover and tail markings into their corresponding slots, and close the body.