The other is that if the bracket is hard for you to remove, you can apply some XII glue remover on the plastic slice and insert it into the gap to scrape inner cold glue. But can’t apply too much glue remover on the flex cable and IC position.

When we remove the bezel, you should remove one side first and stop at the flex cable position. Then remove another side and stop at the flex cable position.

The following is a key point to remove the bezel of flex cable position. Here we also have two things should be cautioned.

One is the plastic slice should be inserted from the right side of the screen where there is a display IC position and then scrape the inner cold glue.