Skip to main content

Fix Your Stuff

Right to Repair

Store

Help

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Step Type:

Drag to rearrange

Use a Y000 driver to remove the 1.1 mm screws securing the LCD shield:

Three screws on the side nearest the display cables

Two more screws on the opposite side

Press your driver firmly into the screw while turning it. If needed, you can use your spudger to brace each screw from behind, in order to apply more pressure to the screws without bending the shield.

Your contributions are licensed under the open source Creative Commons license.