crwdns2933803:03crwdne2933803:0
crwdns2933797:0Tobias Isakeitcrwdnd2933797:0crwdne2933797:0
crwdns2936043:0crwdne2936043:0 crwdns2933505:0crwdne2933505:0 Tobias Isakeit
- crwdns2933769:0crwdne2933769:0
- crwdns2933771:0crwdne2933771:0
- crwdns2933801:0crwdne2933801:0
crwdns2933807:0crwdne2933807:0
| - | [* black] Adjust the braking lever to around 45° and remove the bleeding screw. |
|---|---|
| - | [* black] Fill up the bleeding syringe to the half and install it to the braking lever. *** - ONLY USE DOT 5.1 - Remove all air bubbles from the syringe to prevent, that they come into the system during the bleeding procedure. *** |
| - | [* black] Install the hose on the bleeding nipple, then open the nipple around 1/2 turns. ***Please be careful also and watch out for air bubbles into the syringe.*** |
| + | [* black] Adjust the braking lever to a 45° angle and remove the bleeding screw. |
| + | [* black] Fill up half the bleeding syringe with DOT 5.1 brake fluid. |
| + | [* icon_note] Make sure there are no bubbles that can get into the system during the bleeding procedure. |
| + | [* black] Mount the syringe to the braking lever. |
| + | [* black] On the caliper side install the hose on the bleeding nipple, then open the nipple 1/2 turn. |
| + | [* icon_note] Again, watch out for air bubbles in the syringe. You don't want them. |