crwdns2936637:0crwdne2936637:0 crwdns2853008:0crwdne2853008:0 crwdns2918746:0crwdne2918746:0

crwdns2933803:07crwdne2933803:0

crwdns2933797:0Nickcrwdnd2933797:0crwdne2933797:0

crwdns2936043:0crwdne2936043:0 crwdns2933505:0crwdne2933505:0 Nick

crwdns2933769:0crwdne2933769:0
crwdns2933771:0crwdne2933771:0
crwdns2933801:0crwdne2933801:0

crwdns2933807:0crwdne2933807:0

[title] Printer configuration (Manual)
-[* icon_note] ***This install procedure is required when using the HP UPD as a substitute driver.*** ***Note:*** If you have attempted driver installation through the Dynamic Mode universal printer, this method can be used to correct bad installations.
-[* icon_note] If you are installing the printer over USB, ***USB_001*** is considered a "safe" port. Unless you use a special configuration, this port generally works in most scenarios. ***Older printers may use the DOT4 protocol. If this is the case, the port will need to be changed from USB_001 to DOT4.***
+[* icon_note] ***This install procedure is required when using the HP UPD as a substitute driver (primarily for legacy printers).*** ***Note:*** If you have a failed Dynamic Mode installation, this can be used to correct the error.
+[* icon_note] If you are installing the printer over USB, ***USB_001*** is considered "safe". Unless you use a special configuration, this port is the best for compatibility. ***NOTE: Older printers like the LaserJet 1200 and 1012 often use DOT4. If this is the case, DOT4 must be used. If you see a DOT4 port on your PC, you may have one of these printers.***
[* red] Find ***Devices and Printers***. The location varies based on which version of Windows you run, but this can be found in Control panel. ***Windows 8.x: Search for "Devices and Printers"; Windows 10: Search for Control panel and find Devices and Printers.***
-[* orange] Click ***Add a Printer***. If you use a USB cable, select ***Add a Local printer.*** For network installation, select ***Add a Network, Wireless or Bluetooth printer***.
-[* yellow] Allow your computer to populate the driver list. Find ***HP*** and then locate the driver that says ***HP Universal Printing PCL6 [Version]***. Select this driver and click ***Next.***
-[* icon_reminder] ***The printer name does not need to be changed, but this makes identification easier.***
+[* orange] Click ***Add a Printer***. Select ***Add a Local printer*** if your printer uses USB. If networked, select ***Add a Network, Wireless or Bluetooth printer***.
+[* yellow] Allow your computer to populate the driver list. Find ***HP*** and then locate the driver that says ***HP Universal Printing PCL6, PCL5 or PostScript***. Select this driver and click ***Next.***
+[* icon_reminder] ***The printer name can be left as-is, but may make identification difficult, especially in a multi-printer setting.***
[* green] Name your printer. Once a name is selected, click ***Next.***