crwdns2933803:06crwdne2933803:0
crwdns2933797:0Nickcrwdnd2933797:0crwdne2933797:0
crwdns2936043:0crwdne2936043:0 crwdns2933505:0crwdne2933505:0 Nick
- crwdns2933769:0crwdne2933769:0
- crwdns2933771:0crwdne2933771:0
- crwdns2933801:0crwdne2933801:0
crwdns2933807:0crwdne2933807:0
| - | [* black] Put the laser back in the PlayStation, and see how it reads various games. If you can read 80% of your games after doing this, then your laser should be adjusted enough to read games with good success. |
|---|---|
| + | [* black] Put the laser back in the PlayStation, and see how it reads various games. If you can read 80% of your games after doing this, then your laser should be adjusted enough to read games with good success. Shoot for 90% if you can. |
| [* black] To perform a read test, find a certain amount of games you can use to test the lasers read performance. You can use as many as you want, but make sure you have a fair amount to reasonably judge the read performance of the laser. I used 5 games, but you can use more or less, if you wish. | |
| [* black] ***Do not adjust the laser further until you finish the current test.*** Play each game on the system, and see if it reads correctly. Account for any problems in the performance of the game. If it does not read, FAIL it for this test, and test it again when you adjust it further. If it has problems, call it FLAKY. If it reads correctly pass it. | |
| [* black] For any further testing on this, adjust the laser further and then do the test from the beginning as if it was a new test. There will be a point you spin the laser up so fast, the motor spins down quickly for exceeding it's limit for adjustment. Once you find this, remember it and don't hit it again. | |
| [* icon_note] From this point on, you can adjust the laser without removing it from the console if further adjustment is required. Just don't do this with a game in it. | |
| [* black] If you see the ***Insert PlayStation CD-ROM*** screen, you are going too slow to get it to authenticate the test disc. You will need to increase the trimpot futher. |