crwdns2933803:03crwdne2933803:0
crwdns2933797:0Kristen Gismondicrwdnd2933797:0crwdne2933797:0
crwdns2936043:0crwdne2936043:0 crwdns2933505:0crwdne2933505:0 Kristen Gismondi
- crwdns2933769:0crwdne2933769:0
- crwdns2933771:0crwdne2933771:0
- crwdns2933801:0crwdne2933801:0
crwdns2933807:0crwdne2933807:0
| [* icon_note] The screw holding the antenna in place may have fallen out, and would be loose in the device or stuck to a speaker magnet. Re-secure the screw if it was loose. | |
| [* red] Inspect the solder joints that join the coaxial cable to the antenna. If the coaxial cable solder joints are loose, frayed, or snapped, re-soldering is required. | |
| - | [* black] If the solder joints are damaged, |
| + | [* black] If the solder joints are damaged, desolder the coaxial cable from the antenna base. |
| [* icon_caution] Soldering irons can reach temperatures of up to 900 degrees F. Handle with caution. | |
| [* black] Carefully solder the antenna signal element to the small wire in the core of the coaxial cable. Ensure the core wire can not touch any other electrical connections. | |
| [* black] Gently arrange the coaxial cable so that the outer shielding of the coaxial cable can be soldered to the ground of the antenna. Check that the solder joint is sturdy. |