crwdns2936637:0crwdne2936637:0 crwdns2853008:0crwdne2853008:0 crwdns2918746:0crwdne2918746:0

crwdns2933803:05crwdne2933803:0

crwdns2933797:0Nickcrwdnd2933797:0crwdne2933797:0

crwdns2936043:0crwdne2936043:0 crwdns2933505:0crwdne2933505:0 Nick

crwdns2933769:0crwdne2933769:0
crwdns2933771:0crwdne2933771:0
crwdns2933801:0crwdne2933801:0

crwdns2933807:0crwdne2933807:0

[title] Reinstall the printhead and ink
[* icon_caution] ***If the printer is plugged in without a printhead and ink installed, the calibration data will be erased!***
[* icon_caution] ***If the printhead is not satisfactorily dry, do not touch the printer until you are satisfied it is fully dried out.***
-[* icon_reminder] If your printer says ***Printhead Problem***, your calibration data is erased. The most common reason is incorrect printhead installation. Reinitialzation of these printers uses a lot of ink (~1/2 of the ink in Retail cartridges), so a new set of cartridges is recommended. ***Note: While used ink can be used, these printers frequently complain.***
-[* black] Once you have let the printhead sit long enough to fully dry, reinstall the printhead. To do this, reverse the procedure used to remove it. Once the printhead is reinstalled, put the ink in next.
-[* black] Once the printhead is installed, put the ink cartridges in the printer. Once this is done, plug the printer in. ***Note:*** Your printer run a ***Printhead Preparation*** purge, which cannot be stopped.
+[* icon_reminder] If your printer says ***Printhead Problem***, the calibration data will be erased. If this happens, check if the printhead is installed correctly. ***WARNING: Printhead initialization uses a lot of ink. On non XL cartridges, it can use ~1/2 of the ink in the installed cartridge. New ink should be purchased if this happens.***
+[* icon_reminder] ***Note:*** While the printer will not treat the printhead as "new", it will need to run a ***Printhead Preparation*** process. This cannot be avoided.
+[* black] Once the printhead is satisfactorily dry, reinstall it in the printer. This should be done in the reverse order it was removed. After the printhead is installed, install your ink cartridges. Once this is done, it is safe to plug the printer in.