crwdns2933803:05crwdne2933803:0
crwdns2933797:0Nickcrwdnd2933797:0crwdne2933797:0
crwdns2936043:0crwdne2936043:0 crwdns2933505:0crwdne2933505:0 Nick
- crwdns2933769:0crwdne2933769:0
- crwdns2933771:0crwdne2933771:0
- crwdns2933801:0crwdne2933801:0
crwdns2933807:0crwdne2933807:0
| - | [title] Reinstalling the printhead and ink |
|---|---|
| - | [* icon_caution] ***Wait until the printhead is fully dry before replacing it. I recommend waiting 4-6 hours or putting the printhead in front of a fan to help speed the drying process up.*** |
| - | [* icon_caution] ***DO NOT plug the printer back in until the printhead and ink cartridges are replaced. If you get this wrong, your calibration data will be erased.*** |
| - | [* icon_note] If your printer says you have a ***Printhead Problem***, you failed to preserve the calibration data. The printhead was NOT replaced correctly. Your printer will use ~1/2 of your ink cartridges to restore the calibration stored in the printer. ***Note: If your inks are used and this happens, your printer will complain about the ink being used.*** |
| - | [* black] Once the head is wiped dry and has sat long enough to clear the water from the printhead, put the printhead back in the printer. |
| - | [* black] Reinstall the printhead. To do this, follow the procedure to remove it in reverse. Put the ink cartridges back in once this is done. |
| - | [* black] ***Once the printhead and ink is replaced***, close the lid and plug the printer back in. Your printer will run a "printhead preparation''' procedure, which cannot be interrupted. |
| + | [title] Reinstall the printhead and ink |
| + | [* icon_caution] ***DO NOT plug the printer back in until the printhead and ink cartridges are replaced. If you do not install the printhead before plugging the printer in, you will erase the calibration data.*** |
| + | [* icon_caution] ***Wait until the printhead is fully dry before replacing it. It is best to wait 4-6 hours unless you plan on putting the printhead in front of a fan to dry the printhead faster.*** |
| + | [* icon_note] If your printer says ***Printhead Problem***, you did something wrong and lost your calibration data. The common cause is incorrect printhead installation. Your printer will now need to reinitialize, which will use ~1/2 of the ink in a Retail cartridge set. ***Note: If you are using used ink to initialize the printer, the printer will complain.*** |
| + | [* black] Once you have let the printhead sit long enough to fully dry, reinstall the printhead. To do this, reverse the procedure used to remove it. Plug the printer back in at this point. |
| + | [* black] Put the ink cartridges back in once this is done. Your printer will now run a ***Printhead preperation*** step, which is unavoidable. |