crwdns2933803:05crwdne2933803:0
crwdns2933797:0Nickcrwdnd2933797:0crwdne2933797:0
crwdns2936043:0crwdne2936043:0 crwdns2933505:0crwdne2933505:0 Nick
- crwdns2933769:0crwdne2933769:0
- crwdns2933771:0crwdne2933771:0
- crwdns2933801:0crwdne2933801:0
crwdns2933807:0crwdne2933807:0
| [title] Reinstalling the printhead and ink | |
| [* black] Once the head is wiped dry and has sat long enough to clear the water from the printhead, put the printhead back in the printer. ***Important: Do not plug the printer in until this is finished. Doing this wrong will erase the printhead calibration.*** | |
| [* black] Reinstall the printhead. To do this, reverse the way you removed it from the printer. | |
| [* black] Put the ink cartridges back in the printer. | |
| [* black] Plug the printer back in, and close the lid. The printer will run a cleaning once you do this, but you lose substantially less ink then you will lose if you were to reset the stored calibration. | |
| [* icon_note] If you continue having problems with the quality, try replacing the ink cartridges. If this does not work, the printhead is very likely to be beyond repair. A new printhead will cost ~$80 brand new, so they are not worth replacing. It may not hurt to try another head clean at this point to try and save it. | |
| - | [* icon_reminder] If you get a message that says ***Printhead Problem***, you did not replace the printhead correctly. At this point you will want to buy a new set of ink cartridges, since you will lose ~2 |
| + | [* icon_reminder] If you get a message that says ***Printhead Problem***, you did not replace the printhead correctly. At this point you will want to buy a new set of ink cartridges, since you will lose ~1/2 of the ink on retail cartridges. It will also complain about the ink being used, if you use your old ink cartridges to do this, but it should accept them. |