crwdns2936637:0crwdne2936637:0 crwdns2853008:0crwdne2853008:0 crwdns2918746:0crwdne2918746:0

crwdns2933803:06crwdne2933803:0

crwdns2933797:0Nickcrwdnd2933797:0crwdne2933797:0

crwdns2936043:0crwdne2936043:0 crwdns2933505:0crwdne2933505:0 Nick

crwdns2933769:0crwdne2933769:0
crwdns2933771:0crwdne2933771:0
crwdns2933801:0crwdne2933801:0

crwdns2933807:0crwdne2933807:0

[title] Align the magnet and glue it in place
[* icon_caution] ***You only have 1 shot at this. If you glue it in the wrong position, you may need a new controller frame. If you are repairing both, do one at trigger at a time.***
-[* icon_reminder] ***If this fix is being applied to reinstall the magnets, align them before applying glue.*** This is not required if your alignment is good but replacing the worn out double sided tape.
-[* icon_note] If the glue you use cures sooner, it may be possible to reduce the drying time.
-[* red] After taping the magnet(s) down in the previous step, verify the alignment is correct one more time. ***After verifying the alignment is correct***, glue the magnet(s) to the controller frame.
-[* orange] Once the magnets are glued in, let the glue sit for 24 hours before reassembly.
+[* icon_reminder] If your glue cures faster, it may be possible to reduce the curing time.
+[* icon_reminder] ***If this fix is being applied to realign the magnets, do this before applying glue.*** This is not required for good alignments with worn out double sided tape.
+[* red] After taping the magnet(s) down in the previous step, double check the alignment. ***After verifying the alignment is correct, glue the magnet(s) to the controller frame.***
+[* orange] Once the magnets are glued in, let the glue cure for 24 hours. Reverse disassembly once the glue is cured.