crwdns2933803:06crwdne2933803:0
crwdns2933797:0Nickcrwdnd2933797:0crwdne2933797:0
crwdns2936043:0crwdne2936043:0 crwdns2933505:0crwdne2933505:0 Nick
- crwdns2933769:0crwdne2933769:0
- crwdns2933771:0crwdne2933771:0
- crwdns2933801:0crwdne2933801:0
crwdns2933807:0crwdne2933807:0
| [title] Align the magnet and glue it in place | |
| - | [* icon_caution] ***You only have 1 shot at this. If you glue it in the wrong position, you may need a new controller frame. If both triggers have a problem, repair each trigger individually; do not do both at the same time.*** |
| - | [* icon_reminder] If the reason you are doing this repair is related to games self pressing the trigger, realign the magenets to fix this ***before*** gluing them into the frame. In this scenario, I am replacing the worn out double sided tape used at the factory. |
| + | [* icon_caution] ***You only have 1 shot at this. If you glue it in the wrong position, you may need a new controller frame. If you are repairing both, do one at trigger at a time.*** |
| + | [* icon_reminder] ***If this fix is being applied to reinstall the magnets, align them before bluing them onto the frame.*** This is not required if you replacing worn out factory installed double sided tape. |
| + | [* icon_note] If the glue you use cures sooner, it may be possible to reduce the drying time. |
| [* black] After taping the magnet(s) down in the previous step, verify the alignment is correct one more time. ***After verifying the alignment is correct***, glue the magnet(s) to the controller frame. | |
| - | [* black] Once the magnets are glued in, let them dry for 24 hours before finishing the repair. |
| + | [* black] Once the magnets are glued in, let them dry for 24 hours before finishing the repair. |