|
Introduction |
| If you heard five beeps, One of the side wheels on vacuum is stuck, and to fix this problem, first check to see if there are any obstructions that would prevent the wheels from turning. Then, you should put the unit on its back, push the wheels to make sure they aren’t stuck, and then turn them by hand to see if they have the same amount of resistance. You can also clean the wheel assembly with air or a vacuum. | | | If you heard seven beeps, one of the side wheels on your Roomba is stuck. Check to see if there are any obstructions in the way that are preventing the wheels from moving. If needed, you can use compressed air or a vacuum to clean out the wheel assembly of any dirt, dust, or debris. | | | If you heard ten beeps, the device has not registered an obstacle yet. In larger rooms with little furniture, this is likely the problem. It can also mean that one of the side wheels is stuck. To fix this issue, you will need to check for obstructions, and the final touch will be cleaning the wheel assembly with compressed air or a vacuum. |
|
|
Conclusion |
| << Under Construction >> | | 5 Beeps. Spin Roomba’s Side Wheels to Clean | | | This error will let you know that one of the side wheels on your vacuum is stuck. To fix this issue, first check to see if there are any obstructions that would prevent the wheels from turning. Then, much like with the first error, you will want to put the unit on its back, push the wheels to make sure they aren’t stuck, and then turn them by hand to see if they have the same amount of resistance. You can also clean the wheel assembly with air or a vacuum. | | | 7 Beeps. Spin Roomba’s Side Wheels to Clean | | | Seven beeps and this error message will inform you that one of the side wheels on your Roomba is stuck. Check to see if there are any obstructions in the way that are preventing the wheels from moving. Further examine your vacuum by checking if the resistance on the wheels is the same on both sides. If needed, you can use compressed air or a vacuum to clean out the wheel assembly of any dirt, dust, or debris. | | | Error 10. Spin Roomba’s Side Wheels to Clean | | | This message is the same as several others that are typically found on Roomba products, but this message usually means that the device has not registered an obstacle yet. In larger rooms with little furniture, this is likely the problem. It can also mean that one of the side wheels is stuck. To fix this issue, you will need to check for obstructions, ensure that the same resistance is felt with each wheel, and the final touch will be cleaning the wheel assembly with compressed air or a vacuum. |
|