|
Introduction |
This guide will show how to replace the thermal fuse in the Hot Tools HPK12 flat iron. Make sure to unplug the flat iron and give the flat iron the proper time to cool down before beginning disassembly. | | This guide shows the proper steps to replace the thermal fuse in a Hot Tools HPK12 flat iron. Before starting, carefully read over the [https://www.ifixit.com/Wiki/Hot_Tools_HPK12_Troubleshooting|ifixit troubleshooting guide] to address what issue your iron is having and if the thermal fuse is what needs to be replaced. As always, be sure the iron is disconnected from power and cooled for at least 45 minutes before beginning. Under no circumstance should the iron be turned on until it is correctly and completely reassembled. |
|