| You will need solder device in order to be able to replace the Press-to-speak button. |
| You will need a replacement button, a soldering device, and a Screwdriver(4mm) in order to replace the Press-to-speakbutton. You need to know how to solder. |
| Solder: a low-melting alloy, especially one based on lead and tin or (for higher temperatures) on brass or silver, used for joining less fusible metals. |
|
| Step 1: Flip the Walkie Talkie over so that the bottom is facing up. |
| * * There should be a red sticker that says "Kidzlane." |
| Step 2: Unscrew the 2 very top and 2 very bottom screws. (4mm Screwdriver) |
| ** There should be four screws. |
| Step 3: Separate the two pieces. Then, unscrew the 3 screws on top of the green panel. |
| Step 4: Use the soldering device to take out the old button and replace it with the new one. |
| How to Solder: https://www.youtube.com/watch?v=ZwU9SqO0udU |
| Step 5: Reassemble the device. |
| * Place the green panel inside the device. |
| * Screw in the 3 screws. |
| * Put the two pieces of the device together. |
| * Screw in the two top and two bottom screws. |