|
Introduction |
| This guide will show you how to replace the loading spring in the Koosh Vortex Tornado, a toy gun from the 90s that shoots small rings. The loading spring in this and many other toy guns is what pushes the projectile out of the gun to let it travel, so if you notice that you are not getting as much distance when shooting the toy gun or you want to get more distance, than this guide is for you! | | If your Koosh Vortex Tornado is not shooting as far as you would like, use this guide to replace the loading spring inside of the toy gun. The loading spring is used in the firing mechanism by priming the spring with the priming handle and releasing the spring using the trigger, pushing the projectile out at high speed. | | | Before using this guide, make sure that you have a replacement spring ready, and the resistance of the spring is up to you. You can either replace the spring with the same spring but only newer, or choose to upgrade to a stronger spring that can shoot farther, but it can risk breaking the toy gun. |
|