| # Remove screws from the back cover of the device. |
| # Once the back cover is off, remove four smaller screws from the Motherboard. |
| # On the top right, you will see two sets of wires. One set is made up of a red and a green wire and the other set is made up of a red and blue wire. You will notice that both sets are attached by their combs to the Motherboard. Remove both of the combs. |
| # On the left side, there is a skinny rectangular piece which is also attached to a set of wires made up of a white and a blue wire. Detach the skinny rectangular piece from the set of wires. |
| # Located on the right side of the skinny rectangular piece is a long white comb that is attached to a what looks like a film roll. Remove the "film roll" by gently pulling on it with tweezers. |
| # Last but not least, on the bottom right of the Motherboard is a comb that is attached to white connector. Remove with tweezers |