|
Introduction |
This guide demonstrates on the proper removal of the face buttons on the EasySMX ESM-9100. | | A probable reason for the face buttons on your controller to have stopped working may be that they have gotten misaligned within the controller and no longer reaches the board when pressed. If they don't work all the time, it because of faulty placement within the shell of the controller as well as the panels not being fully secured to hold the buttons in place. The b button is especially prone to these issues as it has a unique and smaller shape compared to the other buttons. If any of these issues occur it can be remedied with a simple realignment or replacement which can be found within this guide. Since this will require working closely with the internal electronics be careful not to damage them so that the controller does not become entirely unresponsive. |
|