|
Introduction |
The motor in the Bissell CrossWave Cordless Max (model 2554A) is connected to the display through wires. If the motor is not working correctly, the vacuum is inoperable. This can stem from various issues with the battery and the motherboard. This [link|https://www.ifixit.com/Wiki/Bissell_CrossWave_Cordless_Max_2554A_Troubleshooting_Guide#Section__Motor_is_not_spinning|guide|new_window=true] has troubleshooting information, and this guide instructs [link|https://www.ifixit.com/Guide/Bissell+CrossWave+Cordless+Max+2554A+Motherboard+and+Display+Replacement/171639|motherboard replacement.|new_window=true]
Without the wires being soldered to the motor, the vacuum will not have a motor. The Last step features soldering the connecting for the motor. For good practice, this guide has information on [link|https://www.ifixit.com/Guide/How+To+Solder+and+Desolder+Connections/750|soldering|new_window=true]. The pathway to the motor is closely related to the battery guide. The motor is below the Motherboard and Display. |
|