|
Introduction |
| If your AL2216W is having problems, it is very likely that it is a capacitor issue. Here are some signs of bad capacitors: | | '''Note:''' While some issues may be corrected with a partial capacitor replacement, this is not recommended. Do all of the capacitors in one shotrepair once and you will not have to worry about the problem coming back a second timeagain. | | * Power issues (This monitor has thisPresent issue) | * Excessive transformer hum (This monitor has thisPresent issue) | * Excessive inverter hum (This monitor has thisPresent issue) | * Troublesome VGA Auto adjustmentadjust (This monitor has thisPresent issue) | | * Backlight problems | | * Power problems | * Video issues (ExamplesEx: Unstable image, Image drops when connected to a computer, does not play nice on higher resolutions, random image drops) | | * Random power issues that may only resolve if the monitor is physically unplugged. | | === Original capacitor values (Only use these if you do not want to install better caps then the monitor came with) === | | * 25V 1000uF (x2) | | * 10V 1000uF (x1) | | * 25V 220uF (x2) | | * 16V 2200uF (Used on the inverter side of older power supplies) |
|