|
Introduction |
| '''Note: The entry for 60/40 solder is being considered optional. If you want to use lead free solder, it will also work as well.''' | | If your AL2216W is acting up, you probably need to replace the capacitors. Here are some signs of bad capacitors. | | * Power issues (No power, for example)* | | * Video issues(Image stability, doesn't stay on when plugged into a computer, resolution specific issues, image drops at random)* | | * Auto adjustment issues | * Power light is unstable all the time (NotThis problem is not common. However, thisit can happen if the caps are bad enough.) | | * Unplugging it to get it to work becomes a problem | | * Excessive transformer/inverter hum* | | NOTENote: If you have a problem with a * next to it, replace all of them no matter what the condition is. | | The one in the guide has automatic adjustment issues and some power issues when hooked up to a computer. It also had transformer hum problems. This monitor has been opened before so this one was easier. If you have never opened it this tends to be a pain for the first time it is done. | | | '''If you injure yourself performing this repair, I will not take responsibility for your actions! FOLLOW ALL SAFETY INSTRUCTIONS AND GUIDANCE TO AVOID INJURY!''' |
|